 |
|||
|
|||
|
|
|||
| Greenwood Products Kiln Stick Specifications | ||
|
MACHINING |
||
 |
S2S, Smooth Ripped Edges, Smooth End Trimmed | |
|
GENUS |
||
| |
Dipterocarpus | |
|
MOISTURE CONTENT |
||
| |
Air Dried to Maximum 25% M/C Per Grading Rules | |
|
TOLERANCES |
||
| 1. 2. 3. 4. 5. 6. |
Thickness Width Length No Twist Allowed Spring Allowed Bow Deviation |
+ or - 1/16" + or - 1/16" +0 - 1/8" 1/4" Maximum in a 4' Piece 1/2" Maximum in a 8' Piece 1/16" Maximum in a 4' Piece 1/8" Maximum in a 8' Piece |
|
GRADE |
||
| 1. 2. 3. |
Standard Per Mgr, Allowing Scatter Pin Holes & Occasional Shot Holes Up to 10% Sapwood Allowed Decay Not Allowed |
|
|
PACKAGING |
||
| 1. 2. 3. 4. |
Stickers to be Packaged to Protect Against Shipping Damage, Forklift Handling, and in Accordance with Ocean Carrier Regulations. Crate Size Minimum 42" Wide / Maximum 46" wide Crates are Not to be Covered With Any Type of Covering That Will Inhibit Air Drying Crates to be Bundled With Dunnage Under the Strapping, on the Bottoms of the Crates to Allow for Forklift Handling |
|
|
MARKING |
||
| 1. 2. |
Paint Ends with Order Number, Crate Number and Total Number of Pieces per Crate. (Ends Must be Painted With Yellow Paint Only) Crates Must be Labeled With the Destination of the Order |
|
|
SHIPPING METHOD |
||
| |
Ocean Freight (Break Bulk) Unless Otherwise Specified | |
|
About Us | Locations | LVL Kiln Sticks | Contact Us |
 For comments or questions, please contact Web Master © 2008 Greenwood Products Inc.
This Site Designed and Hosted By:
|
